|
Snow removal or snow clearing is the job of removing snow after a snowfall to make travel easier and safer. This is done by both individual households and by governments and institutions. ==De-icing and anti-icing== (詳細はBrine or wetted salt is usually applied shortly before a snowstorm arrives. Properly performed, anti-icing can significantly reduce the amount of salt required, and allows easier removal by mechanical methods (snowplows).〔Cornell Local Roads Program, ''Snow and Ice Control Operations for Local Highway Officials''〕 De-icing of roads has traditionally been done with salt, spread by snowplows or dump trucks designed to spread it, often mixed with sand and gravel, on slick roads. Sodium chloride (rock salt) is normally used, as it is inexpensive and readily available in large quantities. However, since salt water still freezes at −18 °C or 0 °F, it is of no help when the temperature falls below this point. It also has a strong tendency to cause corrosion: rusting the steel used in most vehicles and the rebar in concrete bridges. More recent snowmelters use other salts, such as calcium chloride and magnesium chloride, which not only depress the freezing point of water to a much lower temperature, but also produce an exothermic reaction. They are somewhat safer for concrete sidewalks, but excess should still be removed. More recently, organic compounds have been developed that reduce the environmental issues connected with salts and have longer residual effects when spread on roadways, usually in conjunction with salt brines or solids. These compounds are generated as byproducts of agricultural operations such as sugar beet refining or the distillation process that produces ethanol.〔(Better Roads- dead link pending resolution with Better Roads magazine )〕 Additionally, mixing common rock salt with some of the organic compounds and magnesium chloride results in spreadable materials that are both effective to much colder temperatures (−30 °F/−34 °C) as well as at lower overall rates of spreading per unit area.〔http://www.magicsalt.info/Magic%20Salt.htm〕 Since the 1990s, use of liquid chemical melters has been increasing, sprayed on roads by nozzles instead of a spinning spreader used with salts. Liquid melters are more effective at preventing the ice from bonding to the surface than melting through existing ice. Several proprietary products incorporate anti-icing chemicals into the pavement. Verglimit incorporates calcium chloride granules into asphalt pavement. The granules are continually exposed by traffic wear, and release calcium chloride onto the surface. This prevents snow and ice from sticking to the pavement 〔Verglimit SA, Capabilities of Verglimit, http://www.verglimit.eu/en_capabilities.php, Sep 20, 2010, retrieved 12/14/2010〕 Cargill SafeLane is a proprietary pavement surface treatment that absorbs anti-icing brines, to be released during a storm or other icing event. It also provides a high-friction surface, increasing traction.〔Cargill, Inc., SafeLane Surface Overlay, http://www.cargillsafelane.com/, retrieved 12/14/2010〕 In Nagano, Japan, relatively inexpensive hot water bubbles up through holes in the pavement to melt snow, though this solution is only practical within a city or town. Some individual buildings may melt snow and ice with electric heating elements buried in the pavement, or even on a roof to prevent ice dams on the shingles, or to keep massive chunks of snow and dangerous icicles from collapsing on anyone below. Small areas of pavement can be kept ice-free by circulating heated liquids in embedded piping systems. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Snow removal」の詳細全文を読む スポンサード リンク
|